Cooper City, FL Mold Damage Remediation

Got MOLD? 

If your Cooper City home or business has had a roof leak or plumbing leak and the relative humidity reaches 60% or higher, you may have a breeding ground for mold growth.
Because mold eats what it grow on, it can damage a building. If left unchecked it can cause structural damage to building materials.  Eliminating all mold and mold spores indoors is virtually impossible, but controlling indoor moisture will control the growth of indoor mold.  One of the functions of your HVAC system is to remove moisture from the air before the air is distributed throughout your home or business. If the HVAC system is turned off during or shortly after a loss that involves a lot of water, the humidity may rise greatly, and moisture or mold problems may occur quicker. This is why we see a lot of mold issues after Hurricanes. If the electricity goes out and you have any water intrusion in your home or business, you will have mold within 24-48 hours. If you have experienced any water leaks or suspect that you have mold, give the professionals at SERVPRO of East Davie/Cooper City a call @ 954-741-4321.

SERVPRO of East Davie / Cooper City

If You See Signs of Mold, Call Us Today – (954) 741-4321

Understanding Mold

Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Disaster

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Locally Owned, with National Resources

We are proud to be an active member of this community. SERVPRO of East Davie / Cooper City is locally owned and operated, so we’re already nearby and ready to help Cooper City residents and business owners with any size mold contamination.

We proudly serve Davie, FL, Cooper City, FL, and surrounding areas.

Highly Trained Water and Mold Restoration Specialists

As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (954) 741-4321

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mold Damage Assessment

We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.

Step 3: Mold Containment

To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Cooper City, FL home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your Cooper City, FL home or business back to normal. Depending on the severity of mold damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows Mold

SERVPRO of East Davie / Cooper City has the expertise to make any mold problem a memory in Cooper City, FL. We have seen the distress homeowners experience upon finding mold at their property. SERVPRO can help calm any mold concerns. Our trained professionals have the equipment and knowledge it takes to properly remediate mold. Call (954) 741-4321 - We are ready and waiting to respond to your emergency.